Description
Advantages:
-100% seal every time between breech plug and module–Guaranteed!
-Easier module loading (drop them in the slotted bolt face)
-Primer modules uses large rifle magnum primers
-Modules are reusable (easily deprimed and reprimed)
-Life expectancy of 30+ shots for primer modules
-Rated to handle BH209
-Flame channel is completely enclosed in the module, so plug self-cleans after every shot!
-Breech Plug made from 416 SS
-Removable with 7/16″ socket
-Utilizes Tungsten Carbide bushing with 0.035″ hole, hole will not wear out
-Shortest flame path on the market
-Lifetime guarantee on the breech plug when using BH209. If you wear it out, we’ll replace it. (Guarantee does not cover corrosion from neglect.)
-PLEASE NOTE FOLLOWING
- THIS PLUG DOES NOT CHANGE A PARAMOUNT INTO A SMOKELESS RATED FIREARM. WHILE THE ARROWHEAD GEN2 SYSTEM IS FULLY RATED FOR SMOKELESS PRESSURES, THE FACTORY PARAMOUNT BARREL IS A LIGHT WEIGHT CONTOUR AND ONLY RATED FOR BLACK POWDER OR BLACK POWDER SUBSTITUTES!
ALTERNATE TO ELR BULLET FOR PARAMOUNT
45CAL
The bullet we sell that would have best chance of working with the CVA paramount is the 300gr 45cal XLD (CLICK HERE). However, because of the wide range of bore diameters with the paramount, there’s three potential scenarios (see list below). Best option is to buy a sample 10 pack and see how they fit in your barrel.
The 300gr XLD has a real world G1 BC of approx 0.36 at speeds the paramount is capable of obtaining, so substantially higher than the sub 0.3 real world BC that the 280gr ELR produces.
1) MOST COMMON bullet is a little tight and needs sized down with sizing die. CLICK HERE
2) Bullet fits just right with no adjustment needed.
3)Bullet is loose and needs knurled up with file to fit tight enough.
40CAL
Customers have reported good success with the 40cal XLD CLICK HERE and the Fury Star Tips CLICK HERE
A sizing die will be required. . CLICK HERE
A wool wad between bullet and powder usually improves performance in the 40cals CLICK HERE
